Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo) Community
Questions, answers and tips from people who use the Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo). 1D tolerance stack-up with worst-case, RSS, Monte-Carlo simulation, contributors and out-of-spec prediction.
Ask a question about Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo). Pick one to start a thread, or write your own.
From the tool guide: common questions about Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is the difference between worst case and RSS?
Worst case adds all tolerances; RSS combines them statistically as √Σσ².
From the tool guide Ask a follow-upWhat is Cp?
Process capability: tolerance width divided by six standard deviations.
From the tool guide Ask a follow-upWhat this tool does
Tolerance stack-ups answer a simple but important question: given the tolerances on every part in an assembly, how big or small can the gap, clearance or overall length become? Enter each dimension in the chain with its nominal value, plus and minus tolerances, whether it adds to or subtracts from the gap, and the process capability, and the calculator returns the mean gap, the worst-case range (every part at its limit in the unfavourable direction) and the statistical RSS range (mean ± 3σ), together with a contribution table showing which dimension drives the variation.
How to use it, step by step
- Enter each dimension, tolerances, direction and Cp.
- Enter the lower and upper limits for the gap.
- Read worst-case, RSS and Monte-Carlo results.
- Tighten the biggest contributor and recalculate.
Tips from the guide
- Use worst case for safety-critical fits and RSS for cost-sensitive ones.
- Tighten the biggest contributor first.
- Set Cp to the real capability of each process, not 1.0 by default.
- Double-check each dimension's direction (+ or −).
Common mistakes to avoid
- Getting the sign of a dimension wrong.
- Applying RSS to a handful of non-normal, off-centre processes.
- Forgetting that gaps close when parts are added in the opposing direction.
Who uses it
- Mechanical designers. Check that parts fit and move at the extremes.
- Quality engineers. Predict defect rates and set process requirements.
- Students. Learn worst-case versus statistical analysis.
How to ask a question people can answer
A good thread on the Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Tolerance Stack-Up Calculator (Worst Case, RSS & Monte Carlo) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.