Feet & Inches Calculator (Add, Subtract, Multiply, Divide Fractions)
Construction calculator for feet-inch-fraction arithmetic and dividing a length into equal spaces.
More free tools
See Feet & Inches Calculator (Add, Subtract, Multiply, Divide Fractions) in action
Free Feet & Inches Construction Calculator
Working with a tape measure means working with feet, inches and fractions, and ordinary calculators make that painful. This calculator lets you type measurements exactly as you read them — 5′-6 1/2″, 5′ 6-1/2″, 5ft 6in, 66.5″, 5.5′ or 3/4″ — and combine them with + , − , × and ÷: add a list of lengths, subtract a cut, multiply by a count, divide by a number, or divide one length by another to get a ratio. The result is shown in feet-and-inches rounded to the nearest 1/2, 1/4, 1/8, 1/16, 1/32 or 1/64 inch, with the rounding error, plus decimal inches, decimal feet, millimetres and metres. Multiplying two lengths gives an area in square feet.
A second tab divides a total length into equal spaces — for example a 10′-3 1/2″ span into seven equal spaces for balusters, studs or deck boards — and lists every mark, or computes the equal gap between posts or boards of a known width, which is the classic fence and baluster layout problem. Everything runs in your browser.
Use it in 4 steps
Type a calculation or choose an example chip.
Pick the fraction precision.
Read the result in feet-inches, decimal and metric.
Use the second tab to divide a length into equal spaces.
Key features
Tape-measure notation
Type 5′-6 1/2″, 66.5″ or 5ft 6in just like on a plan.
All four operations
Add, subtract, multiply, divide, ratios and areas.
Rounding to any fraction
Nearest 1/2″ to 1/64″ with the error shown.
Equal-space layout
Divide a span or find the gap between posts and boards.
A real example, step by step
5′-6 1/2″ + 3′-2 3/4″ = 8′-9 1/4″ (105.25 in = 2.673 m); 12′-0″ ÷ 7 = 1′-8 9/16″ (to the nearest 1/16″); 10′-3 1/2″ − 2′-8″ = 7′-7 1/2″.
Who uses this tool
Carpenters and builders
Cut lists, layouts and stair calculations.
DIYers
Deck, fence and shelf measurements.
Designers
Convert plan dimensions to decimals.
Tips for the best results
- Put spaces around a minus sign so it is not read as part of a measurement.
- Choose 1/16″ for framing and 1/32″ for finish work.
- Check the rounding error on long runs.
- Use the equal-space tab for baluster and stud spacing.
Common mistakes to avoid
- Typing 5-6 1/2 without a foot mark when you mean 5 feet 6 1/2 inches.
- Forgetting to round a cut to the saw's accuracy.
- Adding a length to a plain number.
Frequently asked questions
Which formats can I type?
Feet and inches with fractions, decimal inches or feet, and ft/in words.
Can it divide into equal spaces?
Yes — on the second tab.
Does it handle metric?
It shows mm and m for every result.
Is it free?
Yes.
Free, fast and private by design
No signup, no watermark. New AZRS tools are added every week.
