Resin 3D Print Calculator — Exposure, Time & Cost Community
Questions, answers and tips from people who use the Resin 3D Print Calculator — Exposure, Time & Cost. Print time, resin volume & cost, exposure time from cure curve, pixel size.
Ask a question about Resin 3D Print Calculator — Exposure, Time & Cost
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Resin 3D Print Calculator — Exposure, Time & Cost. Pick one to start a thread, or write your own.
From the tool guide: common questions about Resin 3D Print Calculator — Exposure, Time & Cost
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Is the exposure model accurate?
It is the standard Jacobs working-curve model — a good starting point, to be refined with test prints.
From the tool guide Ask a follow-upWhat is Dp and Ec?
Dp is the resin's penetration depth, Ec its critical energy; both come from the resin supplier or exposure tests.
From the tool guide Ask a follow-upCan I load an STL?
Yes — volume and height are filled in; add support height manually.
From the tool guide Ask a follow-upWhat this tool does
Resin printing has its own arithmetic. Print time is not just layers × exposure: every layer also pays for a lift, retract and wait cycle, which is why thin layers print slowly. Enter the model's volume and height (or drop in an STL to fill them), layer height, bottom layer count and exposures, lift height and speeds and the wait times, and the calculator returns total print time, per-layer time, resin needed including supports and failure allowance, and the cost per print including resin, IPA and electricity.
How to use it, step by step
- Optionally drop your STL for volume and height.
- Enter layer height, exposures, lift and wait times.
- Set supports, waste and resin price.
- Read the time, resin and cost; use the exposure calculator for tuning.
Tips from the guide
- The lift cycle often exceeds exposure: use faster, shorter lifts or thicker layers to save hours.
- Cure-depth overlap of 1.3–2× layer height gives good layer bonding.
- Add IPA/gloves costs per print for honest pricing.
- Measure actual light intensity with a UV meter for accurate exposure.
Common mistakes to avoid
- Forgetting supports and raft volume.
- Ignoring the lift time when estimating print time.
- Taking the exposure from the calculator without an exposure test.
Who uses it
- Resin printer owners. Quote and plan prints.
- Miniature sellers. Cost per model with consumables.
- Tinkerers. Calculate exposure from resin data sheets.
How to ask a question people can answer
A good thread on the Resin 3D Print Calculator — Exposure, Time & Cost saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Resin 3D Print Calculator — Exposure, Time & Cost and related tasks, and it is separate from the sitewide discussion forum where broader topics live.