Gear Calculator & Involute Gear SVG/DXF/STL Generator Community
Questions, answers and tips from people who use the Gear Calculator & Involute Gear SVG/DXF/STL Generator. Module, pitch, centre distance, ratio — and export gears as SVG, DXF or STL.
Ask a question about Gear Calculator & Involute Gear SVG/DXF/STL Generator
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Gear Calculator & Involute Gear SVG/DXF/STL Generator. Pick one to start a thread, or write your own.
From the tool guide: common questions about Gear Calculator & Involute Gear SVG/DXF/STL Generator
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is module?
Pitch diameter ÷ number of teeth, in millimetres — the standard measure of tooth size.
From the tool guide Ask a follow-upIs the profile a true involute?
Yes — computed from the base circle involute equation.
From the tool guide Ask a follow-upWhat about helical or bevel gears?
Only spur gears are generated.
From the tool guide Ask a follow-upIs the STL printable?
Yes — it is an extruded closed solid with a bore hole.
From the tool guide Ask a follow-upWhat this tool does
Enter a module, tooth counts for two gears, a pressure angle and optional profile shift and backlash, and this tool computes the full spur-gear data: pitch, base, tip and root diameters, addendum and dedendum, whole depth, tooth thickness, circular pitch, centre distance, gear ratio, contact ratio and output speed. It warns about undercut on small tooth counts and about a low contact ratio, the two classic design mistakes.
How to use it, step by step
- Enter module and the tooth counts of both gears.
- Adjust pressure angle, profile shift and backlash if needed.
- Check ratio, centre distance and warnings.
- Download SVG, DXF or STL of each gear or the pair.
Tips from the guide
- Both gears must share the same module and pressure angle.
- Use at least 17 teeth (20°) or apply positive profile shift to avoid undercut.
- Add 0.1–0.2 mm of backlash for laser-cut or printed gears.
- For printed gears use thicker face widths and a slightly looser centre distance.
Common mistakes to avoid
- Mixing modules between gears.
- Ignoring the minimum tooth count and ending up with undercut.
- Cutting laser gears at nominal centre distance without allowing for kerf.
Who uses it
- Mechanical engineering students. Check gear calculations and see the geometry.
- Laser-cutter and CNC users. Get accurate gear outlines for plywood or acrylic gears.
- 3D-printing makers. Print gears with the right centre distance.
How to ask a question people can answer
A good thread on the Gear Calculator & Involute Gear SVG/DXF/STL Generator saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Gear Calculator & Involute Gear SVG/DXF/STL Generator and related tasks, and it is separate from the sitewide discussion forum where broader topics live.