GD&T Symbols Reference & Feature Control Frame Builder Community
Questions, answers and tips from people who use the GD&T Symbols Reference & Feature Control Frame Builder. Learn the 14 GD&T symbols, tolerance zones and modifiers, and build a feature control frame to copy or download.
Ask a question about GD&T Symbols Reference & Feature Control Frame Builder
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the GD&T Symbols Reference & Feature Control Frame Builder. Pick one to start a thread, or write your own.
From the tool guide: common questions about GD&T Symbols Reference & Feature Control Frame Builder
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
ASME or ISO?
They are similar but not identical; this page notes the main differences.
From the tool guide Ask a follow-upWhat is MMC?
Maximum material condition — the size with the most material, which grants bonus tolerance.
From the tool guide Ask a follow-upDoes it check my drawing?
No, it is a learning and drafting aid.
From the tool guide Ask a follow-upWhat this tool does
Geometric dimensioning and tolerancing (GD&T) is the symbolic language engineers use to control the form, orientation, location and runout of features on a drawing. This reference lists the 14 characteristic symbols — straightness, flatness, circularity, cylindricity, profile of a line, profile of a surface, perpendicularity, angularity, parallelism, position, concentricity, symmetry, circular runout and total runout — each drawn as a clean vector icon with its category, whether a datum is required, the shape of its tolerance zone, what it controls and a typical use, with search and category filters. The standards differ slightly: ASME Y14.5-2018 removed concentricity and symmetry, ISO 1101 keeps them, and the page says so.
How to use it, step by step
- Browse or search the symbols.
- Open the builder and choose the characteristic and tolerance.
- Add datums and a modifier.
- Copy the frame text or download the SVG.
Tips from the guide
- Remember form tolerances (flatness, straightness) have no datums.
- A position tolerance needs basic dimensions and datums.
- Order datums primary, secondary, tertiary.
- Always follow the standard cited on your drawing.
Common mistakes to avoid
- Using perpendicularity without a datum.
- Confusing runout with concentricity.
- Treating a tolerance zone's width as a ± value.
Who uses it
- Engineering and design students. Learn GD&T symbols and rules.
- Drafters and designers. Build frames correctly for drawings.
- Machinists and inspectors. Interpret what a symbol demands.
How to ask a question people can answer
A good thread on the GD&T Symbols Reference & Feature Control Frame Builder saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the GD&T Symbols Reference & Feature Control Frame Builder and related tasks, and it is separate from the sitewide discussion forum where broader topics live.