Fillet Weld Size & Strength Calculator (AISC & Eurocode) Community
Questions, answers and tips from people who use the Fillet Weld Size & Strength Calculator (AISC & Eurocode). Capacity of fillet welds from leg size and length: AISC ASD/LRFD and Eurocode 3, with minimum and maximum size.
Ask a question about Fillet Weld Size & Strength Calculator (AISC & Eurocode)
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Fillet Weld Size & Strength Calculator (AISC & Eurocode). Pick one to start a thread, or write your own.
From the tool guide: common questions about Fillet Weld Size & Strength Calculator (AISC & Eurocode)
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
What is the throat of a fillet weld?
0.707 times the leg for an equal-leg 45° fillet.
From the tool guide Ask a follow-upASD or LRFD?
They are alternative formats of the same AISC method; use the one your project requires.
From the tool guide Ask a follow-upWhat this tool does
A fillet weld fails along its throat — the shortest distance through the weld from the root to the face, equal to 0.707 times the leg size for an equal-leg weld. This calculator multiplies the throat by the effective length and the allowable shear stress to give the capacity of a weld group: choose the leg size, the length of each weld, how many lines of weld you have (for example both sides of a plate), the electrode strength (E60 to E110) and the base steel, and it returns capacities by three methods — AISC 360 allowable strength design (0.30·F_EXX), AISC 360 LRFD design strength (0.75 × 0.60·F_EXX) and the Eurocode 3 simplified method with the throat and the steel's ultimate strength and correlation factor.
How to use it, step by step
- Enter leg size, weld length and the number of lines.
- Choose the electrode and base steel.
- Read the capacities and the size warnings.
- Enter your load to see utilisation.
Tips from the guide
- Increase leg size or length rather than relying on very large single passes.
- Remember weld capacity assumes a sound, fully fused weld.
- Check the plate itself — base-metal shear can govern thin sections.
- Use end returns and continuous welds for fatigue-sensitive parts.
Common mistakes to avoid
- Using the leg size instead of the throat.
- Applying capacity to eccentric loads without a moment check.
- Ignoring minimum size rules for thick plates.
Who uses it
- Fabricators and welders. Check that a weld is big enough for the load.
- Engineering students. Learn weld throat and capacity calculations.
- Makers. Size welds for frames, jigs and trailers.
How to ask a question people can answer
A good thread on the Fillet Weld Size & Strength Calculator (AISC & Eurocode) saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Fillet Weld Size & Strength Calculator (AISC & Eurocode) and related tasks, and it is separate from the sitewide discussion forum where broader topics live.