Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing Community
Questions, answers and tips from people who use the Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing. Pocket and hole sizes for bearings, magnets, nuts and screw heads by printer and fit, with a test coupon.
Ask a question about Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing
Anyone can read this page. To ask a question, reply or vote, please log in. It takes under a minute.
Log in to askNo questions yet. Yours can be first.
This page shows only real posts from real people, so it starts empty. The guide below has the questions people most often have about the Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing. Pick one to start a thread, or write your own.
From the tool guide: common questions about Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing
The items below are not posts by community members. They come from the written guide for this tool and are here to get a conversation started. Use “Ask a follow-up” to open a thread about any of them.
Are these values guaranteed?
No — they are common starting points; confirm with the coupon.
From the tool guide Ask a follow-upWhy is horizontal larger?
Horizontal holes sag and print slightly undersized, so they need extra clearance.
From the tool guide Ask a follow-upCan I use my own sizes?
Yes, edit the diameter and thickness fields.
From the tool guide Ask a follow-upWhat this tool does
Designing a pocket for a 608 bearing, a 6 × 3 mm magnet or an M3 nut in a 3D-printed part always raises the same question: how big should the hole be? This calculator gives you the pocket diameter and depth for more than 30 common bearings (miniature, 6000/6200 series and LM-UU linear bearings), 22 round magnet sizes, and hex nut traps and screw-head counterbores for M2–M12, adjusted for your printing process (FDM, resin or SLS), the fit you want (press, snug, slip or loose), the hole direction and whether the pocket is covered.
How to use it, step by step
- Pick the tab: bearings, magnets, or nuts and screw heads.
- Choose the part, process, fit and hole direction.
- Read the pocket size, depth and wall recommendations.
- Print the fit-test coupon to confirm for your printer.
Tips from the guide
- Print vertical holes whenever you can — they are rounder and more accurate.
- Press-fit bearings are best with a 0.1 mm interference test coupon.
- Add a 0.4–0.6 mm cover layer over magnets and pause the print to insert them.
- Check polarity before sealing a magnet in.
Common mistakes to avoid
- Using nominal size and finding the part will not fit.
- Forgetting a ledge and pushing the bearing out the back.
- Making walls too thin around strong magnets.
Who uses it
- Makers and designers. Skate wheels, spinners, robot joints and magnetic latches.
- Robotics teams. Bearing seats and nut traps without trial and error.
- Product designers. Embed magnets and hardware into printed parts.
How to ask a question people can answer
A good thread on the Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing saves everyone time. Start with a title that names the exact problem, such as the input you used, the result you expected and the result you got. A title like “Not working” is hard to answer, while a title with the specifics gets replies quickly.
- Say what you tried. List the steps you followed and any settings you changed, so replies do not repeat what you already did.
- Share a small example. A short sample input and the output you saw is worth more than a long description. Remove anything private first.
- Mention your setup. Your device, browser and whether you are on a phone or a computer can explain many odd results.
- One question per thread. Separate topics get clearer answers and are easier to find later with the search box above.
- Come back and reply. If a suggestion worked, say so and upvote it, and if you found the fix yourself, post it for the next person.
Community rules
Be kind, stay on topic and keep personal data out of your posts. Do not post adult, hateful or illegal content, advertising or repeated links. Every post is shown with its author’s username and date, and posts that break these rules can be hidden by moderators. This space is for help with the Bearing, Magnet & Nut Pocket Size Calculator for 3D Printing and related tasks, and it is separate from the sitewide discussion forum where broader topics live.